Custom Wood Countertops, Butcher Block Countertops, Kitchen Island Counter Tops    Custom Wood Countertops, Butcher Block Countertops, Kitchen Island Counter Tops  
    [Home]  [Contact Us]  [Request A Quote]  

Home

Photo Gallery

Custom Tables

Woods Available

Construction Options

Edge Styles

Integrated Options

Finishes

Care and Maintenance

How to Order

Installation Instructions

Request A Quote

Contact Us

About Us

 

    

Thank you for visiting our site!

 

 

   

Request A Quote

Use this form to request information about a countertop, island top, or butcher block you may be interested in.  Please provide as many details about the top you are interested in as possible.

Since every top is unique, detailed information including plans, specs or hand drawings are always helpful and may be required before we can provide a quote for a custom top. 

Square foot pricing can sometimes be provided as a ball-park figure, but detailed information is required for an actual quote. 

Specs or drawings may be e-mailed to us at quotes@devoswoodworking.com or you may fax them to us at (512) 894-0209.

Again, please provide as much information as possible.  We will typically be in touch within 2 business days.

Contact Information:

All contact information is required, except the fax number.  This information is not shared with anyone.  We request it only so we can better serve you.

 

Name

 

Street Address

 

Address (cont.)

 

City

State/Province

Zip/Postal Code

 

Phone

 

FAX

 

E-mail

Type of Top:

What type of top are you interested in?  Please select one of the following:

  Countertop Island Top Butcher Block Table Top
  Desk Top Bar Top Other  

If you selected other, please describe the top below:

Construction Technique:

What type of construction technique are you interested in? Select any that apply:

  Face Grain Face Grain with End-Joints
  Edge Grain Edge Grain with End-Joints
  End Grain (checkerboard)

Wood Types:

Select any of the following wood types you are interested in:

  Mesquite Pecan Sycamore Iroko
  Tobara Teak Cherry Red Oak White Oak
  Ash Sipo Mahogany Hard Maple Walnut
  Alder Antique LongLeaf Pine Beech Birch
  Lacewood African Mahogany Wenge Jatoba
  Tigerwood Zebra Wood  TX Walnut Teak
  Santos Mahogany Purple Heart Bubinga Afromosia
  Lyptus Other    

If you are interested in a type of wood that is not listed, please enter it here:

Edge Styles:

Select any of the following edge profiles that you are interested in:

  Chamfer Classical Cove and Bead
  Dbl. Cove and Bead Ogee Fillet Roundover - With Fillet
  Roman Ogee - Small Roman Ogee - Medium Roman Ogee - Large
  Roundover - Small Roundover - Medium Roundover - Large
  Softened Edge Wave Wave - With Fillet
  For tops more than 2" thick:    
  Large Format Classical Large Format Roman Ogee  

Finishing Options:

Select the type of finish you are interested in:

Tung Oil/Citrus Finish (best when using top as a cutting surface)

Waterlox - Satin

Waterlox - Semi-Gloss
Waterlox - High Gloss

Integrated Options:

What type of sink will be mounted in the counter top?


If you selected other, please describe the sink below:

Are any other cut-outs required in the top?


If you selected other, please describe the cut-out below:

Select any other integrated options you are interested in:

  Sloping Drain Board
  Non-sloping Drain Board
  Granite Insert
  Stainless Steel Grids (hot pad)
 

Knife Block - to accommodate:
    Up to 8 knives 9-12 knives
 

Knife Slots - to accommodate:
    Up to 8 knives 9-12 knives

Size of the Top:

What is the size of the top, in inches:

 

  Width (or depth) Length Thickness
 


For multi-section tops (L-shaped, U-shaped, etc) please provide measurements below.  Length measurement should be for the longest side of each section.  Also, please provide a sketch of the top along with the dimensions.

 
Thickness of the Top:
Type of Joint Desired:
Section Width (or depth)   Length
1
 
2
 
3
 
4
 
5
 
6
 

Custom Shapes:

Is this a standard rectangular shaped top, or are there special shape requirements:

  Standard Rectangular Shape
  Rectangular Shape with Radius Corners
    Number of  corners with a radius?
  Rectangular Shape with Scalloped Edge(s)
    Number of  edges to be scalloped?
  Rectangular Shape with Curved Edge(s)
    Number of  edges to be curved?
  Round Top
  Other.  Please provide a sketch of the top along with the dimensions.

Other Information?

Please add any other information or questions about the top you are interested in below:

Problems with this form?   Our web host is having periodic problems submitting forms.  If you are unable to successfully submit this form, please let us know.  You may forward the quote request to us by printing the page and faxing the information or by copying and pasting the contents of the form into an email.  ( quotes@devoswoodworking.com )  You may also call us directly and request a quote over the phone.  We apologize for the inconvenience this may cause.

 
       
     

1451 W. Hwy 290

Dripping Springs, TX  78620

Phone:  (512) 894-0464  •  Fax:  (512) 894-0209