Request A Quote for a Solid Wood Countertop, Island Top, or Butcher Block


		[Home] [Contact Us] [Request A Quote]
Home Photo Gallery Woods Available Construction Options Edge Styles Integrated Options Finishes Care and Maintenance How to Order Installation Instructions Request A Quote Contact Us About Us Thank you for visiting our site!		Request A Quote
		Use this form to request information about a countertop, island top, or butcher block you may be interested in. Please provide as many details about the top you are interested in as possible. Since every top is unique, detailed information including plans, specs or hand drawings are always helpful and may be required before we can provide a quote for a custom top. Square foot pricing can sometimes be provided as a ball-park figure, but detailed information is required for an actual quote. Specs or drawings may be e-mailed to us at quotes@devoswoodworking.com or you may fax them to us at (512) 894-0209. Again, please provide as much information as possible. We will typically be in touch within 2 business days.
		Contact Information: All contact information is required, except the fax number. This information is not shared with anyone. We request it only so we can better serve you. Name Street Address Address (cont.) City State/Province Zip/Postal Code Phone FAX E-mail Type of Top: What type of top are you interested in? Please select one of the following: Countertop Island Top Butcher Block Table Top Desk Top Bar Top Other If you selected other, please describe the top below: Construction Technique: What type of construction technique are you interested in? Select any that apply: Face Grain Face Grain with End-Joints Edge Grain Edge Grain with End-Joints End Grain (checkerboard) Wood Types: Select any of the following wood types you are interested in: Mesquite Pecan Sycamore Iroko Tobara Teak Cherry Red Oak White Oak Ash Sipo Mahogany Hard Maple Walnut Alder Antique LongLeaf Pine Beech Birch Lacewood African Mahogany Wenge Jatoba Tigerwood Zebra Wood TX Walnut Teak Santos Mahogany Purple Heart Bubinga Afromosia Lyptus Other If you are interested in a type of wood that is not listed, please enter it here: Edge Styles: Select any of the following edge profiles that you are interested in: Chamfer Classical Cove and Bead Dbl. Cove and Bead Ogee Fillet Roundover - With Fillet Roman Ogee - Small Roman Ogee - Medium Roman Ogee - Large Roundover - Small Roundover - Medium Roundover - Large Softened Edge Wave Wave - With Fillet For tops more than 2" thick: Large Format Classical Large Format Roman Ogee Finishing Options: Select the type of finish you are interested in: Mineral Oil Finish (best when using top as a cutting surface) Waterlox - Satin Waterlox - Semi-Gloss Waterlox - High Gloss Integrated Options: What type of sink will be mounted in the counter top? If you selected other, please describe the sink below: Are any other cut-outs required in the top? If you selected other, please describe the cut-out below: Select any other integrated options you are interested in: Sloping Drain Board Non-sloping Drain Board Granite Insert Stainless Steel Grids (hot pad) Knife Block - to accommodate: Up to 8 knives 9-12 knives Knife Slots - to accommodate: Up to 8 knives 9-12 knives Size of the Top: What is the size of the top, in inches: Width (or depth) Length Thickness For multi-section tops (L-shaped, U-shaped, etc) please provide measurements below. Length measurement should be for the longest side of each section. Also, please provide a sketch of the top along with the dimensions. Thickness of the Top: Type of Joint Desired: Section Width (or depth) Length 1 2 3 4 5 6 Custom Shapes: Is this a standard rectangular shaped top, or are there special shape requirements: Standard Rectangular Shape Rectangular Shape with Radius Corners Number of corners with a radius? Rectangular Shape with Scalloped Edge(s) Number of edges to be scalloped? Rectangular Shape with Curved Edge(s) Number of edges to be curved? Round Top Other. Please provide a sketch of the top along with the dimensions. Other Information? Please add any other information or questions about the top you are interested in below:

		Daniel Vos Dripping Springs, TX 78620 General Info: info@devoswoodworking.com Phone: (512) 894-0464 • Fax: (512) 894-0209

Copyright © 2003 [DeVos Custom Woodworking]. All rights reserved.
Revised: December 07, 2007